System builder

Build your WindowCandles system

Everything a complete installation needs, in five steps. Tell us how many windows you're lighting and we'll pre-fill the quantities for you. Each item goes straight to your cart.

  1. 1. Candles
  2. 2. Transformers
  3. 3. Wire
  4. 4. Bases
  5. 5. Finishing

Start with your window count

One candle goes in each window.

  • 15candle kits
  • 1WC50VA transformer
  • 15bases & caps
  • 3sleeve 6-packs
Start building

You can change any quantity before adding it.

Step 1 of 5

Choose your candles

One WindowCandles Assembly Kit (WCA1) per window. Count your windows and that's your quantity.

One kit per window

A 32-window home needs 32 WCA1 kits. Simple as that.

Everything in the box

A WindowCandle, a 302-CLED filament LED bulb, an MCA1-N mounting clip and the installation manual.

Safe low voltage

An NEC Class 2 low-voltage system. Use WC18/2 wire to keep your warranty.

WindowCandles Assembly Kit

WindowCandles Assembly Kit

SKU WCA1

$46.95

  • (1) WindowCandle
  • (1) 302-CLED filament LED bulb
  • (1) MCA1-N mounting clip
  • (1) Installation manual
Out of stock right now

You can still try adding it to your cart. If it's available for preorder, it'll go through. If not, please check back later.

Step 2 of 5

Power it with transformers

One WC50VA powers up to 15 candles. We've worked out how many you need from your window count.

The rule of 15

Every 15 candles needs its own WC50VA, LED or incandescent. It's a certification requirement, not a suggestion.

Where it goes

Near your electrical panel: basement, garage or utility closet. Add a smart plug for phone or voice control.

Specifications

120VAC / 60Hz in, 24VAC at 50VA out. 15 candles max. UL Listed (E508012), suitable for damp locations.

Never test without a load

The WC50VA can't withstand a short circuit. Powering it with no candles attached damages it and voids the warranty.

Transformer calculator

How many candles are you installing?

1transformers needed
WC50VA Transformer

WC50VA Transformer

SKU WC50VA

$42.00

  • Powers up to 15 candles
  • Plugs into any standard 110VAC outlet
  • 24VAC output, NEC Class 2 compliant
  • UL Listed, suitable for damp locations
Out of stock right now

You can still try adding it to your cart. If it's available for preorder, it'll go through. If not, please check back later.

Step 3 of 5

Run the wire

Use only WindowCandles WC18/2 yellow wire. Any substitution voids your warranty.

WC18/2 only

Thermostat wire looks similar but isn't compatible. Anything else voids the warranty and can cause system failure.

Daisy-chained runs

Wire runs candle to candle. Up to 6 candles per run, under 400 ft to avoid voltage drop.

Plan by zone

Group windows by floor and side of the house. Leave a 6–10" loop at each window for trim-out.

Get a little extra

Add at least 20% for loops and overruns. Running short mid-install is a major headache.

Wire estimator

Total length of all your runs, in feet. We add a 20% buffer.

2500 ft boxes
WC18/2 Wire, 500 ft Pull Box

WC18/2 Wire, 500 ft Pull Box

SKU WC18/2

$255.94

  • 500 ft pull box, feeds easily through walls
  • Proprietary yellow 18/2 low-voltage wire
  • UL-recognized Class 2 insulation
  • Installation stickers emailed with purchase
In stock

Step 4 of 5

Pick your bases

One base per window. The base hides the mounting clip and gives each window its finished look. Choose the style that suits your home.

Classic Bases

Classic Bases

$9.99

Base Style: Classic Tall
Base Finish: Brushed Nickel
In stock

Designer Bases

Designer Bases

$12.99

Base Style: Designer Tall
Base Finish: Pewter
In stock

Specialty Bases

Specialty Bases

$14.99

Style: Antique Copper Lighthouse
In stock

Step 5 of 5

Finishing touches

Caps to match your bases and sleeves to protect every candle during construction.

Caps: one per window

Match the cap finish to your bases for a consistent look across the house.

Sleeves: sold in 6-packs

Protect candlesticks during install and trim-out. Strongly recommended for new builds.

Installation stickers

One above each sill tells drywall and trim crews where the wire is. Missing one can mean major rework.

Caps

Caps

$3.00

Finish: Brushed Nickel
In stock

Plastic Sleeves (6-pack)

Plastic Sleeves (6-pack)

$14.99

Color: White
In stock

Recommended extras

Stickers and tools that make installation go smoothly.

Instruction Sticker - 1 Sticker

Instruction Sticker - 1 Sticker

$0.75

In stock

Speed Clip Notice Sticker - 6 Pack

Speed Clip Notice Sticker - 6 Pack

$2.00

In stock

Installation & Removal Tool IRT

Installation & Removal Tool IRT

$4.95

In stock

Straight Cut Wire Cutters

Straight Cut Wire Cutters

$12.95

In stock

Extra & specialty bulbs

Every kit includes one LED bulb. Add spares or try flicker and specialty styles. All bulbs come in 10-packs.

Incandescent Clear 10 Pack [302-C]

Incandescent Clear 10 Pack [302-C]

$21.95

In stock

LED IncanMimic Clear Filament LED 10 Pack [302-CLED] 2300K

LED IncanMimic Clear Filament LED 10 Pack [302-CLED] 2300K

$39.95

Out of stock right now

You can still try adding it to your cart. If it's available for preorder, it'll go through. If not, please check back later.

LED Clear Flickering 2100K 10 Pack [302-FL]

LED Clear Flickering 2100K 10 Pack [302-FL]

$39.95

In stock

All set?

Review your system and check out

Questions before you order? Call us at 1-877-NO-CORDS.

View cart